Apex Air, Heating & Electric Air · Heating · Electric
(559) 210-9405
Permitted & Inspected · CSLB #1072290 24/7 Emergency Power Dispatch

Standby & Portable Generators in Fresno, CA

Whole-home standby, portable backup, and commercial generator installs. Fully permitted, sized to your actual electrical load, and quoted upfront.

Call (559) 210-9405
Fresno's Trusted Generator Installers

Never Lose Power in a Fresno Outage Again

PSPS shutoffs, summer grid strain, and aging infrastructure mean Central Valley homes lose power more than most. A properly sized generator keeps your AC, well pump, refrigeration, and medical equipment running when it matters.

Apex Air, Heating & Electric handles the entire process — load calculation, permitting, PG&E coordination, installation, and inspection sign-off — for whole-home standby, portable, and commercial systems.

Two Apex technicians working inside the open enclosure of a standby generator

Generator Services & Solutions

Most Requested

Whole-Home Standby

Automatic, permanently installed, runs on natural gas or propane, powers your entire home within seconds.

Fast Turnaround

Portable & Backup Units

Manual-start systems sized for essential circuits — a lower-cost option for renters and smaller homes.

Added Reliability

Automatic Transfer Switches

Code-compliant switchgear that isolates your home from the grid and starts your generator automatically.

Utility Connection

Gas & Propane Line Runs

Properly sized fuel lines from your meter or tank to the generator, permitted and pressure-tested.

Commercial & Ag

Commercial Standby Systems

Sized for cold storage, packing houses, irrigation pumps, and other critical Valley operations.

Maintenance

Annual Service Plans

Scheduled load-bank testing, oil changes, and battery checks so your generator starts when you need it.

2026 Generator Installation Cost in Fresno, CA

Transparent pricing is core to how Apex operates. Most Fresno homeowners invest between $8,500 and $16,000 for a whole-home standby install. Here's how installed costs typically break down in the Central Valley:

Service Type Typical Installed Cost Scope of Work & What's Included
Portable / Manual Backup $2,500 – $5,000 Portable unit, manual transfer switch, essential-circuit panel.
Whole-Home Standby (16-22kW) $8,500 – $13,000 Most popular upgrade: automatic standby, gas line, concrete pad, transfer switch, permit and PG&E coordination.
Whole-Home Standby (24-38kW) $13,000 – $18,000 Larger homes with AC, EV charging, and well pumps on essential load.
Fuel Line Extension / Upsize $800 – $2,500 Sized gas or propane run from meter/tank to generator location.
Commercial & Ag Standby Custom Estimate Load calculation, switchgear, and installation sized to critical commercial or agricultural equipment.

*All quotes from Apex Air, Heating & Electric include permit fees, PG&E coordination, concrete pad, and a full 1-year workmanship warranty.

Recent Generator Installs

A whole-home Generac standby installation on a log home in the Fresno County foothills — gas line, exhaust vent, transfer switch, and commissioning.

Apex technician running the gas fuel line to a standby generator at a log home Technician on a ladder installing a stainless exhaust vent through a log home wall Two Apex technicians working inside an open standby generator enclosure Apex technician servicing an open standby generator enclosure on a deck Apex crew commissioning a standby generator before first startup Technician checking the control panel and battery inside a standby generator Close-up of the oil fill and dipstick on a standby generator engine Completed Generac standby generator installation on a concrete pad
Critical Power Notice

Is Your Home at Risk During a PSPS Event?

If you're on medication that requires refrigeration, run a well pump, or live in a high fire-threat district, an unplanned outage isn't just an inconvenience. Fresno and Fresno County saw repeated Public Safety Power Shutoffs during peak fire season — most lasting 24 to 72 hours.

Medical & Refrigeration Risk

CPAP machines, refrigerated medication, and home dialysis equipment all fail without backup power within hours.

Well Pump & Ag Operations

No grid power means no well water and no irrigation control — a standby generator keeps pumps and VFDs running.

Commercial & Agricultural Generator Solutions in the Central Valley

Fresno and the surrounding San Joaquin Valley depend on continuous power for cold storage, packing houses, and irrigation. Apex Air, Heating & Electric provides sized commercial and agricultural standby generator systems built around your critical load.

Cold Storage & Packing Houses

Backup power sized to keep refrigeration and packing lines running through an outage.

Irrigation & Well Pump Systems

Standby generators paired with VFDs and pump controls for uninterrupted irrigation.

Light Industrial Facilities

Critical-load standby systems for equipment, security, and building systems.

Frequently Asked Questions About Generator Installation

How much does a standby generator cost in Fresno, CA?
Most Fresno homeowners invest between $8,500 and $16,000 for a whole-home standby generator installation in 2026. A 16-22kW system — enough for most Central Valley homes — typically runs $8,500 to $13,000 installed, while a 24-38kW system for larger homes with air conditioning, EV charging, and well pumps on the essential load runs $13,000 to $18,000. Portable and manual-start backup systems run $2,500 to $5,000. Every Apex quote includes permit fees, PG&E coordination, the concrete pad, and a full 1-year workmanship warranty.
What size generator do I need for my house?
Generator size is set by a load calculation, not by square footage. We add up what you actually need to keep running — air conditioning, well pump, refrigeration, medical equipment, or a home office — and size the system to that load with the starting surge of large motors like compressors and pumps accounted for. Most Fresno homes land on a 16-22kW whole-home standby system; larger homes with AC, EV charging, and a well pump on the essential load need 24-38kW. We perform the load calculation as part of a free sizing assessment.
What is the difference between a standby and a portable generator?
A standby generator is permanently installed outside your home, runs on natural gas or propane, and starts automatically within seconds of an outage — it powers your whole home without you being there. A portable or manual-start system is a lower-cost option sized for essential circuits only; you start it and connect it through a manual transfer switch, which makes it a practical choice for renters and smaller homes.
Do you handle the permits and PG&E coordination for a generator install?
Yes. Apex Air, Heating & Electric handles the entire process from start to finish: the electrical load calculation, the City of Fresno or Fresno County permit application, PG&E coordination, the gas or propane fuel line run, installation, and final inspection sign-off. All work is performed by licensed electricians and permitted for inspection.
Do you service and maintain generators after installation?
Yes. Annual service plans include scheduled load-bank testing, oil changes, and battery checks, so your generator starts when you actually need it. A standby generator that has sat untested for two years is the most common reason a backup system fails during an outage. Apex Air, Heating & Electric maintains residential, commercial, and agricultural standby systems throughout the Central Valley.
Do you install commercial and agricultural generators in the Central Valley?
Yes. Apex Air, Heating & Electric designs and installs commercial and agricultural standby generator systems built around the critical load: cold storage and packing house refrigeration, irrigation and well pump systems paired with VFDs and pump controls, and light industrial facilities running equipment, security, and building systems. Commercial and agricultural projects are quoted from a load calculation and site evaluation.
Free Written Estimates · No Pressure

Schedule Your Free Generator Sizing Assessment

Licensed electricians. Upfront itemized pricing. Permits and PG&E coordination handled for you from start to finish. Book online in 60 seconds.

Call (559) 210-9405